Changing the configuration Pyxis / Aquarius

The system is factory set to:

Pulse mode
Horizontal key lock
Range limitation off
Standard version without out of range protection, safe version without of range protection

Please note: the changes are to be set for all buttons at the same time.

By changing the configuration, already saved transmitters will be deleted. Other transmitters must be saved again.

NOTE: All Pyxis transmitters that were delivered before 1st of January 2020 are not equipped with this configuration.

Buttons Pyxis	Standard configuration (blink 1x)	Configuration to be activated (blink 2x)
1, 2, 3, 4, 5, 6, 7, 8	Pulse	Hold function
1 & 2	Mutually blocked	No blocking
3 & 4	Mutually blocked	No blocking
5 & 6	Mutually blocked	No blocking
7 & 8	Mutually blocked	No blocking
1 & 3	No blocking	Mutually blocked
2 & 4	No blocking	Mutually blocked
3 & 5	No blocking	Mutually blocked
4 & 6	No blocking	Mutually blocked
5 & 7	No blocking	Mutually blocked
6 & 8	No blocking	Mutually blocked
STOP (SAFE-versions)	1st line output with out of range	Relay function
ON	Range limitation off	Range limitation on

Revert to standard settings

In order to reset the receiver to its standard settings, you need to set only the transmitter to set-up mode and skip the changes. Or delete all transmitters from memory by pressing the programming button for 8 seconds.